The premium backwater pumping station for faecal and non-faecal wastewater is equipped with a pump and a mechanical closure system. The water normally drains to the sewer via natural fall. During the backwater phase, the water drains via the pump with integrated macerator, against the backwater in the sewer. It is controlled by a plug-in ready control unit.
Variant
Emergency closure: yes
Pump control: Control unit
Motor-driven backwater flaps: 1
General characteristics
Colour: black
Nominal size (DN): 150
Outer diameter (OD): 160 mm
Type of wastewater: for wastewater with and without sewage
Installation situation: floor slab installation
Delivery state: Pre-mounted for final assembly on site (pumps and sensor system must be fitted on site and control unit must be connected)
Approval: Z-53.2-388
Cable length: 5 m
Dimensions
Net weight: 25 kg
Groundwater resistant from lower edge of base section: 3 mm
Cutout dimension, width: 750 mm
Cutout dimension, length: 750 mm
Vertical drop between inlet and outlet: 9 mm
Installation depth: 486 - 640 mm
Type of height adjustability: vertically adjustable upper section
Length: 656 mm
Height: 370 mm
Packaging dimension: length: 656,1 mm
Packaging dimension: width: 590 mm
Packaging dimension: height: 348 mm
Coverage features
Type of cover: Cover plate
Cover material: Polymer
Colour of cover: black
Width of cover: 384 mm
Height of cover: 42 mm
Length of cover: 384 mm
Locking: locked
Load class: L 15 (EN 1253-1)
Pumping device
Pump: SPZ 1000
Number of pumps: 1
Weight, pump: 10 kg
Connection type: coded plug
Rated current: 5,2 A
Protection class: I
Insulation class: F
Cos phi - power factor: 0,97
Protection class (pump): IP 68 (3m/48h)
Temperature monitoring: integrated
Max. temperature (permanent) of conveyed material: 40 °C
Max. pumping capacity: 11,5 m³/h
Max. pumping height: 10 m
Speed: 2800 U/min
Power P1: 1,2 kW
Power P2: 0,69 kW
Operating mode: S3 - 50 %
Type of fuse required (electrical protection): C 16 A
Type of pump connection cable: H07RN-F 3G 1.5 mm²
Impeller type: Macerator
Motor connection cable type: ÖPVC-JB/OB 300/500 V/3 x 0,75 mm2 mm²
Sensor connection cable type: ÖPVC-JB/OB 300/500 V/3 x 0,75 mm2 mm²
Length of mains cable for pump: 5 m
Control
Control unit: Standard
Protection class control unit: IP 54
Mains frequency: 50 Hz
Operating voltage: 230 V
Connection type: coded plug
Log book function: yes
Battery buffering: yes
Self-diagnosis system (SDS): yes
Type of fuse required (electrical protection): C 16 A
