The premium backwater pumping station Pumpfix S for faecal-free wastewater is equipped with one pump and two mechanical backwater flaps which close automatically in the event of backwater. Normally, draining takes place via the natural gradient to the sewer. During the backwater phase, draining takes place via the integrated pump against backwater pressure into the sewage channel.
Variant
Passage seal for conduit pipe (DN): 50
Discharge rate (l/s) with 20 mm threshold: 1,6
Mechanical backwater flaps: 2
System installation: Waterproof concrete
General characteristics
Standard: EN 1253-1
Nominal size (DN): 100
Outer diameter (OD): 110 mm
Installation situation: floor slab installation
Backwater protection: Type 5
Odour trap: included
Dimensions
Net weight: 12,85 kg
Gross weight: 13,41 kg
Cutout dimension, width: 350 mm
Cutout dimension, length: 530 mm
Length: 510 mm
Width: 330 mm
Height: 270 mm
Packaging dimension: length: 590 mm
Packaging dimension: width: 386 mm
Packaging dimension: height: 277 mm
Coverage features
Type of cover: Slotted cover
Cover material: Polymer
Colour of cover: black
Load class: A 15 (EN 124)
Pumping device
Connection type: Schuko (earthed contact) 2-pin
Protection class: I
Protection class (pump): IP 68
Max. temperature (permanent) of conveyed material: 40 °C
Max. pumping capacity: 8 m³/h
Max. pumping height: 8 m
Speed: 2800 U/min
Power P1: 0,5 kW
Power P2: 0,32 kW
Operating mode: S1
Type of pump connection cable: H07RN-F 3G 1.5 mm²
Length of mains cable for pump: 5 m
Rated current: 2,2 A
Control
Mains frequency: 50 Hz
Operating voltage: 230 V
Connection type: Schuko (earthed contact) 2-pin
Type of fuse required (electrical protection): C 16 A
