Product 9 of 9
The pump system for installation in existing collection tanks for wastewater without sewage is equipped with two submersible pumps suitable for continuous operation, and two backflow preventers.
The compact polymer (PU) bracket is used for the variable mounting of components in various application scenarios and to fasten the pumping system, even in confined spaces.
All common types of pressure pipe can be connected using the 90° quick-release closure. Quick-release closures enable the integrated components to be removed easily.
The components are pre-assembled for final assembly on site.
Control is carried out by means of a level float via user-friendly 230V Connect Duo control unit that can optionally be integrated into the building management system through a potential-free contact.
Variant
Type of system: duo pump
Installation: Wet installation
Pump control: Control unit
Backflow preventer: integrated
General characteristics
Standard: EN 12050-2
Type of wastewater: without sewage
Installation situation: installation in on-site collecting tank
Delivery state: Modular set for assembly on site
System type: Duo
Dimensions
Net weight: 17,5 kg
Gross weight: 21,29 kg
Length: 403 mm
Width: 380 mm
Height: 448 mm
Packaging dimension: length: 586 mm
Packaging dimension: width: 386 mm
Packaging dimension: height: 400 mm
Tank/drain body
Pressure pipe connection (DN): 40
Pressure pipe connection (OD): 50 mm
Pumping device
Pump: GTF 500
Number of pumps: 2
Weight, pump: 6 kg
Connection type: Schuko (earthed contact) 2-pin
Rated current: 2,5 A
Protection class: I
Insulation class: F
Cos phi - power factor: 0,91
Protection class (pump): IP 68 (3m)
Temperature monitoring: integrated
Max. temperature (permanent) of conveyed material: 40 °C
Hot water resistance for a short time (2 min): 80 °C
Max. pumping height: 8 m
Speed: 2800 U/min
Power P1: 0,6 kW
Power P2: 0,36 kW
Operating mode: S1
Type of pump connection cable: H07RN-F 3G 1.5 mm²
Impeller type: Multi-vane impeller
Free passage: 10 mm
Type of fuse required (electrical protection): C 16 A
Length of mains cable for pump: 10 m
Control
Control unit: Connect Duo
Control unit function: With alarm message
Motor protection switch: yes
Alarm sensor: Float switch
Level measurement instrument: Float switch
Type of level measurement: mechanical
Protection class control unit: IP 54
Mains frequency: 50 Hz
Operating voltage: 230 V
Connection type: Schuko (earthed contact) 2-pin
Length of mains cable for control unit: 1,4 m
Potential-free contact: optional
Battery buffering: yes
Self-diagnosis system (SDS): yes
Warning equipment version: acoustic and optical signal
Type of fuse required (electrical protection): C 16 A
The compact polymer (PU) bracket is used for the variable mounting of components in various application scenarios and to fasten the pumping system, even in confined spaces.
All common types of pressure pipe can be connected using the 90° quick-release closure. Quick-release closures enable the integrated components to be removed easily.
The components are pre-assembled for final assembly on site.
Control is carried out by means of a level float via user-friendly 230V Connect Duo control unit that can optionally be integrated into the building management system through a potential-free contact.
Variant
Type of system: duo pump
Installation: Wet installation
Pump control: Control unit
Backflow preventer: integrated
General characteristics
Standard: EN 12050-2
Type of wastewater: without sewage
Installation situation: installation in on-site collecting tank
Delivery state: Modular set for assembly on site
System type: Duo
Dimensions
Net weight: 17,5 kg
Gross weight: 21,29 kg
Length: 403 mm
Width: 380 mm
Height: 448 mm
Packaging dimension: length: 586 mm
Packaging dimension: width: 386 mm
Packaging dimension: height: 400 mm
Tank/drain body
Pressure pipe connection (DN): 40
Pressure pipe connection (OD): 50 mm
Pumping device
Pump: GTF 500
Number of pumps: 2
Weight, pump: 6 kg
Connection type: Schuko (earthed contact) 2-pin
Rated current: 2,5 A
Protection class: I
Insulation class: F
Cos phi - power factor: 0,91
Protection class (pump): IP 68 (3m)
Temperature monitoring: integrated
Max. temperature (permanent) of conveyed material: 40 °C
Hot water resistance for a short time (2 min): 80 °C
Max. pumping height: 8 m
Speed: 2800 U/min
Power P1: 0,6 kW
Power P2: 0,36 kW
Operating mode: S1
Type of pump connection cable: H07RN-F 3G 1.5 mm²
Impeller type: Multi-vane impeller
Free passage: 10 mm
Type of fuse required (electrical protection): C 16 A
Length of mains cable for pump: 10 m
Control
Control unit: Connect Duo
Control unit function: With alarm message
Motor protection switch: yes
Alarm sensor: Float switch
Level measurement instrument: Float switch
Type of level measurement: mechanical
Protection class control unit: IP 54
Mains frequency: 50 Hz
Operating voltage: 230 V
Connection type: Schuko (earthed contact) 2-pin
Length of mains cable for control unit: 1,4 m
Potential-free contact: optional
Battery buffering: yes
Self-diagnosis system (SDS): yes
Warning equipment version: acoustic and optical signal
Type of fuse required (electrical protection): C 16 A
Declaration of Conformity
UK-DOC Retrofit SDeclaration of Performance (DOP)
DOP Retrofit SDimensional drawings
mz_8744050_393389.pdfDWG data
8744050_01082024_393390.dwgInstallation and operating instructions
Retrofit S