Product 3 of 50
The ready to plug in small lifting station for faecal-free wastewater is suitable for wastewater drainage of individual sanitary appliances. The submersible pump with float switch can be removed easily with the help of one-handed closures. The collection tank made of polymer (PE) has an open pump tank and is resistant to aggressive wastewater. The system for installation in the floor slab is preassembled for final installation on site.
Variant
Type of system: Single unit
Resistant: Resistant to saline media, wastewater from water softening systems and wastewater containing condensate from heating systems
Pump control: Float switch
Backflow preventer: integrated
General characteristics
Colour: grey
Standard: EN 12050-2
Type of wastewater: without sewage
Installation situation: floor slab installation
Delivery state: Installation-ready (connection parts must be connected on site)
Dimensions
Net weight: 10,8 kg
Gross weight: 11,8 kg
Installation depth: 330 - 460 mm
Type of height adjustability: vertically adjustable upper section
Length: 460 mm
Width: 380 mm
Packaging dimension: length: 460 mm
Packaging dimension: width: 460 mm
Packaging dimension: height: 500 mm
Tank/drain body
Pressure pipe connection (DN): 32
Pressure pipe connection (OD): 40 mm
Inlet nominal size (DN): 50 mm
Pumping volume: 7 l
Tank volume: 26 l
Coverage features
Type of cover: Cover plate with slotted cover
Cover material: Polymer
Colour of cover: silver grey
Width of cover: 366 mm
Length of cover: 366 mm
Locking: Lock & Lift
Load class: K 3 (EN 1253-1)
Pumping device
Pump: KTP 300 resistant
Number of pumps: 1
Weight, pump: 4 kg
Connection type: Schuko (earthed contact) 2-pin
Rated current: 1,6 A
Protection class: I
Insulation class: F
Protection class (pump): IP 68 (3m)
Temperature monitoring: integrated
Max. temperature (permanent) of conveyed material: 40 °C
Hot water resistance for a short time (2 min): 80 °C
Max. pumping capacity: 8 m³/h
Max. pumping height: 6 m
Speed: 2800 U/min
Power P1: 0,34 kW
Power P2: 0,21 kW
Operating mode: S1
Type of fuse required (electrical protection): C 16 A
Type of pump connection cable: H07RN-F 3G 1.5 mm²
Impeller type: Multi-vane impeller
Free passage: 10 mm
Length of mains cable for pump: 5 m
Control
Motor protection switch: yes
Level measurement instrument: Float switch
Type of level measurement: mechanical
Mains frequency: 50 Hz
Operating voltage: 230 V
Connection type: Schuko (earthed contact) 2-pin
Type of fuse required (electrical protection): C 16 A
Variant
Type of system: Single unit
Resistant: Resistant to saline media, wastewater from water softening systems and wastewater containing condensate from heating systems
Pump control: Float switch
Backflow preventer: integrated
General characteristics
Colour: grey
Standard: EN 12050-2
Type of wastewater: without sewage
Installation situation: floor slab installation
Delivery state: Installation-ready (connection parts must be connected on site)
Dimensions
Net weight: 10,8 kg
Gross weight: 11,8 kg
Installation depth: 330 - 460 mm
Type of height adjustability: vertically adjustable upper section
Length: 460 mm
Width: 380 mm
Packaging dimension: length: 460 mm
Packaging dimension: width: 460 mm
Packaging dimension: height: 500 mm
Tank/drain body
Pressure pipe connection (DN): 32
Pressure pipe connection (OD): 40 mm
Inlet nominal size (DN): 50 mm
Pumping volume: 7 l
Tank volume: 26 l
Coverage features
Type of cover: Cover plate with slotted cover
Cover material: Polymer
Colour of cover: silver grey
Width of cover: 366 mm
Length of cover: 366 mm
Locking: Lock & Lift
Load class: K 3 (EN 1253-1)
Pumping device
Pump: KTP 300 resistant
Number of pumps: 1
Weight, pump: 4 kg
Connection type: Schuko (earthed contact) 2-pin
Rated current: 1,6 A
Protection class: I
Insulation class: F
Protection class (pump): IP 68 (3m)
Temperature monitoring: integrated
Max. temperature (permanent) of conveyed material: 40 °C
Hot water resistance for a short time (2 min): 80 °C
Max. pumping capacity: 8 m³/h
Max. pumping height: 6 m
Speed: 2800 U/min
Power P1: 0,34 kW
Power P2: 0,21 kW
Operating mode: S1
Type of fuse required (electrical protection): C 16 A
Type of pump connection cable: H07RN-F 3G 1.5 mm²
Impeller type: Multi-vane impeller
Free passage: 10 mm
Length of mains cable for pump: 5 m
Control
Motor protection switch: yes
Level measurement instrument: Float switch
Type of level measurement: mechanical
Mains frequency: 50 Hz
Operating voltage: 230 V
Connection type: Schuko (earthed contact) 2-pin
Type of fuse required (electrical protection): C 16 A
Dimensional drawings
mz_280570sc_213616.pdfDWG data
280570SC_01022021_213614.dwgInstallation and operating instructions
016-083e_12078.pdf