The lifting station for faecal-free wastewater is equipped with a submersible pump and a backflow preventer. The collection tank made of permanently resistant polymer (PE) offers universal connection options. One-handed closures enable easy removal of the integrated components. The station is controlled optionally by a float switch (Mono) or a user-friendly control unit (Tronic and Duo), which are optionally integrated in the building management system via a potential-free contact or alarm and collective fault messages can be output via a GSM interface.
Variant
Type of system: Single unit
Pump control: Float switch
Backwater protection: integrated
Pressure pipe connection: horizontal
General characteristics
Colour: black
Standard: EN 12050-2
Installation situation: floor slab installation
Delivery state: Pre-mounted for final assembly on site (pumps and sensor system must be fitted on site and control unit must be connected)
System type: Mono
Dimensions
Net weight: 19,05 kg
Gross weight: 20,7 kg
Cutout dimension, width: 700 mm
Cutout dimension, length: 700 mm
Installation depth: 481 - 656 mm
Vertical adjustment: vertically adjustable upper section
Length: 590 mm
Width: 590 mm
Packaging dimension: length: 610 mm
Packaging dimension: width: 610 mm
Packaging dimension: height: 490 mm
Tank/drain body
Pressure pipe connection (DN): 32
Pressure pipe connection (OD): 40 mm
Connection conduit pipe (DN): 50
Distance from centre of outlet pipe to tank bottom: 258 mm
Inlet max. scoring (DN): 100 mm
Coverage features
Type of cover: tileable cover plate
Cover material: Polymer
Width of cover: 384 mm
Height of cover: 42 mm
Length of cover: 384 mm
Drainage function: yes
Locking: locked
Load class: A 15 (EN 124)
Max. flooring height: 16 mm
Pumping device
Pump: KTP 500
Number of pumps: 1
Weight, pump: 7 kg
Connection type: Schuko (earthed contact) 2-pin
Rated current: 2,2 A
Length of mains cable for pump: 5 m
Protection class: I
Insulation class: F
Cos phi - power factor: 0,96
Protection class (pump): IP 68 (3m)
Temperature monitoring: integrated
Max. temperature (permanent) of conveyed material: 40 °C
Max. pumping capacity: 8,5 m³/h
Max. pumping height: 8 m
Speed: 2800 U/min
Power P1: 0,5 kW
Power P2: 0,32 kW
Operating mode: S1
Type of fuse required (electrical protection): C 16 A
Type of pump connection cable: H07RN-F 3G 1.5 mm²
Impeller type: Multi-vane impeller
Free passage: 10 mm
Control
Level measurement instrument: Float switch
Type of level measurement: mechanical
Mains frequency: 50 Hz
Operating voltage: 230 V
Connection type: Schuko (earthed contact) 2-pin
Rated current: 2,2 A
