The separator for greasy wastewater is suitable for free-standing set-up in frost-protected rooms and is manufactured without the need for metallic internal structural components. The collection tank made of permanently resistant polymer (PE) is equipped with an integrated sludge trap and has sloped sides in the base to promote fast and efficient disposal. Two odour-tight covers with quick-release closures make easy access possible for cleaning and maintenance work.
Cleaning and odour-neutral disposal takes place via an oscillating high-pressure nozzle and an exterior pump, which can be disconnected from the tank by a shut-off valve.
The fully-automatic program run is controlled by a user-friendly control unit with multi-line display that can be integrated into the building management system via a potential-free contact. Cleaning and disposal can be started remotely using the remote control, which is available as an option.
Thanks to the customisable cleaning program with fast-selection function, cleaning can be adapted to the local circumstances as required. After disposal, a maximum of 3 litres residual sludge volume is left in the tank. Compliance with the German Drinking Water Hygiene Ordinance can be ensured by fully-automatic rinsing of the drinking water pipes.
High-pressure lance for cleaning the inside of the separator, with twist and tilt resistant connection to the grease separator tank, permanently odour-tight, with orbital spray head for 360 degree cleaning of the separator, with two spray nozzles in the orbital spray head
High-pressure cleaner for generating high-pressure cleaning water with drinking water quality; the supply connection is made via the grease separator’s refill inlet, incl. filter for ensuring adequate water quality; mesh size max. 800 µm
High-pressure cleaner make: Kärcher
High-pressure cleaner type: HD 8/18-4 M
20 year polyethylene warranty.
Variant
Shut-off valve: yes
Disposal variant: High pressure
Sludge bucket: yes
Nominal size (NS): 10,00
SonicControl: no
Disposal system: Disposal pump
Refill inlet in accordance with DIN 1988: yes
Type of disposal: automatic disposal and cleaning system
Water supply: 1 Solenoid valve 1"
Load-bearing capacity (DIN 19901): F3
General characteristics
Material: PE
Standard: EN 1825: 2004
Installation situation: free-standing installation
Scope of delivery: Storz-B coupling R 2 1/2" for disposal vehicle connection
Dimensions
Net weight: 295 kg
Gross weight: 295 kg
Operating weight: 36.0
Oil quantity: 0,35 l
Set-up area, length: 2830 mm
Set-up area, width: 1280 mm
Set-up area, height: 1900 mm
Required access area, length: 2590 mm
Required access area, width: 940 mm
Required access area, height: 1678 mm
Packaging dimension: length: 2830 mm
Packaging dimension: width: 1280 mm
Packaging dimension: height: 1900 mm
Tank/drain body
Nominal pressure (PN): 10
Pressure pipe connection (DN): 65
Pressure pipe connection (OD): 75 mm
Distance pipe bottom outlet to tank bottom: 1185 mm
Distance pipe bottom inlet to tank bottom: 1255 mm
Outlet nominal size (OD): 160 mm
Outlet nominal size (DN): 150 mm
Inlet nominal size (OD): 160 mm
Inlet nominal size (DN): 150 mm
Connection inlet/outlet sockets: PE-HD pipes in accordance with DIN 19537, HT pipes in accordance with DIN 19560, PP or AS
Coverage features
Type of cover: Cover
Cover material: Polymer
Colour of cover: violet
Locking: Quick-release closure
Tightness: odour-tight
Wastewater contents
Separator contents: 900 l
Total volume: 1900 l
Contents of sludge trap: 1000 l
Storage quantity of grease: 400 l
Pumping device
Pump: SPF 300 KE 2.0
Number of pumps: 1
Weight, pump: 44 kg
Connection type: Direct connection
Protection class: I
Protection class (pump): IP 55
Max. temperature (permanent) of conveyed material: 40 °C
Max. pumping capacity: 60 m³/h
Max. pumping height: 17 m
Speed: 2850 U/min
Power P1: 3,6 kW
Power P2: 3 kW
Operating mode: S2 - 30 min.
Type of fuse required (electrical protection): Fuse protection through control unit 400 V
Type of pump connection cable: H07RN-F 7G 1.5 mm²
Impeller type: Radial impeller with macerating system
Length of mains cable for pump: 5 m
Rated current: 6,2 A
Control
Control unit: yes
Motor protection switch: yes
Type of fuse required (RCD): 30 mA
Protection class control unit: IP 54
Mains frequency: 50 Hz
Operating voltage: 400 V
Connection type: Direct connection
Potential-free contact: yes
GSM interface: no
USB interface: yes
Log book function: yes
Multi-line display: yes
Battery buffering: no
Self-diagnosis system (SDS): yes
Type of fuse required (electrical protection): Fuse protection through control unit 400 V
Pressure washer lance
Drive: Motor with transformer, integrated in housing
Power consumption during operation: 300
Load current, max.: 2,1
Cycle duration, max. : 4 min
Pressure, max.: 250 bar
Max. temperature: 95
Nozzle hole: 1
Hydraulic connection: 3/8 '' IG
High-pressure cleaning
Pumping capacity, water: 0,21 l/s
Operating voltage: 230
Mains frequency: 60 Hz
Cable extension: 2.5 mm² (with maximum length of 30 m)
Water connection
Inlet pressure, max.: 1 MPa
Max. inlet temperature: 60 °C
Min. inlet quantity: 0,27 l/s
Suction height, max.: 500
Unit performance data
Operating pressure: 18 MPa
Operation pressure, max.: 27 MPa
Pumping capacity, water: 0,21 l/s
