The separator for greasy wastewater is suitable for free-standing set-up in frost-protected rooms and comes without metallic components in the tank. The collecting tank made of permanently resistant polymer (PE) is equipped with an integrated sludge trap and has a tapered base for fast and clean disposal. Two odour-tight covers with quick-release closures make easy access possible for cleaning and maintenance work. The innovative Shredder-Mix-System with integrated macerating system is responsible for homogenising and circulating the tank contents. Cleaning is carried out by an exterior pump which can be disconnected from the tank by a shut-off valve. After disposal, a maximum of 3 litres residual sludge volume is left in the tank. A direct disposal pipe socket is available for odour-neutral manual disposal. 20 year polyethylene warranty.
Variant
Shut-off valve: yes
Nominal size (NS): 10,00
Refill inlet in accordance with DIN 1988: yes
Type of disposal: manual cleaning system
General characteristics
Material: PE
Delivery state: Installation-ready (electrical components, connection parts must be connected on site)
Scope of delivery: Storz-B coupling R 2 1/2" for disposal vehicle connection
Dimensions
Net weight: 215 kg
Gross weight: 215 kg
Set-up area, length: 2430 mm
Set-up area, width: 1220 mm
Required access area, length: 2700 mm
Required access area, width: 990 mm
Required access area, height: 1560 mm
Tank/drain body
Nominal pressure (PN): 10
Pressure pipe connection (DN): 65
Pressure pipe connection (OD): 75 mm
Distance pipe bottom outlet to tank bottom: 1130 mm
Distance pipe bottom inlet to tank bottom: 1200 mm
Outlet nominal size (OD): 160 mm
Outlet nominal size (DN): 150 mm
Inlet nominal size (OD): 160 mm
Inlet nominal size (DN): 150 mm
Connection inlet/outlet sockets: PE-HD pipes in accordance with DIN 19537, HT pipes in accordance with DIN 19560, PP or AS
Servicing opening: 420 mm
Coverage features
Type of cover: Cover
Cover material: Polymer
Colour of cover: black
Locking: Quick-release closure
Tightness: odour-tight
Wastewater contents
Separator contents: 794 l
Contents of sludge trap: 1000 l
Storage quantity of grease: 423 l
Pumping device
Pump: SPF 300 KE
Number of pumps: 1
Weight, pump: 44 kg
Connection type: Direct connection
Rated current: 6,2 A
Protection class: I
Insulation class: F
Cos phi - power factor: 0,87
Protection class (pump): IP 55
Temperature monitoring: integrated
Max. temperature (permanent) of conveyed material: 40 °C
Max. pumping capacity: 60 m³/h
Max. pumping height: 17 m
Speed: 2850 U/min
Power P1: 3,6 kW
Power P2: 3 kW
Operating mode: S2 - 30 min.
Type of fuse required (electrical protection): Fuse protection through control unit 400 V
Type of pump connection cable: H07RN-F 7G 1.5 mm²
Impeller type: Radial impeller with macerating system
Length of mains cable for pump: 5 m
Control
Control unit: no
Mains frequency: 50 Hz
Operating voltage: 400 V
Connection type: Direct connection
Type of fuse required (electrical protection): Fuse protection through control unit 400 V
