The separator for greasy wastewater is suitable for free-standing set-up in frost-protected rooms and comes without metallic components in the tank. The collecting tank made of permanently resistant polymer (PE) is equipped with an integrated sludge trap and has a tapered base for fast and clean disposal. Two odour-tight covers with quick-release closures make easy access possible for cleaning and maintenance work. The innovative Shredder-Mix-System with integrated macerating system is responsible for homogenising and circulating the tank contents. Cleaning and odour-neutral disposal takes place via an exterior pump with 2-way valve and actuator which can be disconnected from the tank by a shut-off valve. The fully automatic program run is controlled by a user-friendly control unit with multi-line display that can be integrated into the building management system through a potential-free contact. Cleaning and disposal can be started remotely using the remote control, which is available as an option. Thanks to the customisable cleaning program with fast-selection function, cleaning can be adapted to the local circumstances as required. After disposal, a maximum of 3 litres residual sludge volume is left in the tank. Observance of the Drinking Water Hygiene Directive can be guaranteed through the fully automatic rinsing of the drinking water pipes. 20 year polyethylene warranty.
Variant
Shut-off valve: yes
Shredder-Mix-System: yes
Sludge bucket: yes
Nominal size (NS): 10,00
SonicControl: yes
Disposal system: Disposal pump
Refill inlet in accordance with DIN 1988: yes
Type of disposal: automatic disposal and cleaning system
Water supply: 2 solenoid valves 1"
General characteristics
Material: PE
Installation situation: free-standing installation
Delivery state: Installation-ready (electrical components, connection parts must be connected on site)
Scope of delivery: Storz-B coupling R 2 1/2" for disposal vehicle connection
Dimensions
Net weight: 200 kg
Gross weight: 265 kg
Set-up area, length: 2430 mm
Set-up area, width: 1220 mm
Required access area, length: 2700 mm
Required access area, width: 990 mm
Required access area, height: 1560 mm
Tank/drain body
Nominal pressure (PN): 10
Pressure pipe connection (DN): 65
Pressure pipe connection (OD): 75 mm
Distance pipe bottom outlet to tank bottom: 1130 mm
Distance pipe bottom inlet to tank bottom: 1200 mm
Outlet nominal size (OD): 160 mm
Outlet nominal size (DN): 150 mm
Inlet nominal size (OD): 160 mm
Inlet nominal size (DN): 150 mm
Connection inlet/outlet sockets: PE-HD pipes in accordance with DIN 19537, HT pipes in accordance with DIN 19560, PP or AS
Servicing opening: 420 mm
Coverage features
Type of cover: Cover
Cover material: Polymer
Colour of cover: black
Locking: Quick-release closure
Tightness: odour-tight
Wastewater contents
Separator contents: 794 l
Contents of sludge trap: 1000 l
Storage quantity of grease: 423 l
Pumping device
Pump: SPF 300 KE
Number of pumps: 1
Weight, pump: 44 kg
Connection type: Direct connection
Rated current: 6,2 A
Protection class: I
Insulation class: F
Cos phi - power factor: 0,87
Protection class (pump): IP 55
Temperature monitoring: integrated
Max. temperature (permanent) of conveyed material: 40 °C
Max. pumping capacity: 60 m³/h
Max. pumping height: 17 m
Speed: 2850 U/min
Power P1: 3,6 kW
Power P2: 3 kW
Operating mode: S2 - 30 min.
Type of fuse required (electrical protection): Fuse protection through control unit 400 V
Type of pump connection cable: H07RN-F 7G 1.5 mm²
Impeller type: Radial impeller with macerating system
Length of mains cable for pump: 5 m
Control
Control unit: yes
Motor protection switch: yes
Type of fuse required (RCD): 30 mA
Protection class control unit: IP 54
Mains frequency: 50 Hz
Operating voltage: 400 V
Connection type: Direct connection
Potential-free contact: yes
GSM interface: no
USB interface: yes
Log book function: yes
Multi-line display: yes
Battery buffering: no
Self-diagnosis system (SDS): yes
Type of fuse required (electrical protection): Fuse protection through control unit 400 V
